epoxy resin

1. The Research Progress of Epoxy Resin Modified Blocking Waterborne Polyurethane
   环氧树脂嵌段改性水性聚氨酯的研究进展
2. The problem of crack initiation in epoxy resin sealing compounds at low temperature is discussed in this paper.
   针对如何解决环氧树脂灌封料在低温下易产生开裂这一问题进行了探讨。
3. The preparation and properties of superfine glass powder/ epoxy resin composites were studied.
   研究了玻璃粉／环氧树脂封接复合材料的制备与性能。
4. In this paper, the copolymer emulsion of acrylates with epoxy resin was prepared and characterized.
   研究了环氧改性丙烯酸酯乳液的合成工艺。
5. Using the silver paste and epoxy resin as die bonding materials, two kinds of power LEDs are made.
   分析了功率型LED热阻系统的构成，对采用银浆和环氧胶作为芯片键合材料的功率型LED热阻进行了对比研究。
6. Study of Structure and Properties for TiO_2, Silicone Resin and Polyurethane Modified Epoxy Resin
   二氧化钛、硅树脂和聚氨酯改性环氧树脂的结构与性能研究
7. Study on the Epoxy Resin Adhesive Modified by Polyimide
   聚酰亚胺改性环氧树脂胶粘剂的研究
8. The sulfonium salt has better curing character to epoxy resin.
   该硫鎓盐对环氧树脂具有良好的固化性能。
9. New process on phosphorus curing agents of epoxy resin are reviewed.
   综述了含磷环氧树脂固化剂研究的新进展。
10. It was found that the adhesive tensile and shear strength of the modified epoxy resin was increased.
    实验表明：预聚体的加入明显提高了环氧树脂的粘接剪切强度和拉伸强度。
11. This report covers preliminary results of EPR study of electrical aging in epoxy resin for insulation.
    本文讨论了电绝缘用环氧树脂电老化过程的电子顺磁共振研究初步结果。
12. The thermal properties of cured epoxy resin was evaluated with TMA and TG.
    最后采用TMA及TG对固化物的耐热性能进行了评价。
13. Influences of polyurethane structure on bonding performance of epoxy resin adhesive modified by polyurethane
    聚氨酯结构对聚氨酯改性环氧树脂胶粘剂粘接性能的影响
14. The synthetic methods of modified acrylate latices with organic silicon compounds, epoxy resin, polyurethane, organic fluorine compounds were reviewed.
    综述了丙烯酸酯乳液有机硅改性、环氧树脂改性、聚氨酯改性、有机氟改性的方法和特点。
15. Water Resistance and Mechanical Properties of Acrylate Copolymer Modified by Waterborne Epoxy Resin
    水性环氧树脂改性丙烯酸共聚物的耐水性和力学性能
16. Electrospun PSF nanofibrous membranes were prepared to toughen TGDDM epoxy resin.
    本课题采用静电纺丝制备了聚砜（PSF）纳米纤维膜，以增韧TGDDM环氧树脂。
17. Vinyl ester resin was synthesized using bisphenol A type epoxy resin and methylacrylic acid as raw materials.
    以双酚A型环氧树脂与甲基丙烯酸为原料合成了乙烯基酯树脂。
18. Epoxy resin structural adhesive with high-temperature resistant of one component at intermediate temperature;
    本文描述了室温固化环氧树脂结构胶粘剂的历史和四个发展阶段。
19. Processing properties of epoxy resin system and phenolic resin for co-injection RTM process
    用于共注射RTM工艺的环氧树脂和酚醛树脂的工艺特性
20. For this procedure, you'll need a hot glue gun and/ or epoxy resin.
    对于这一个方法，你需要粘合剂喷枪或者环氧基树脂树脂。
21. Development and Application of New Curing Agents for Epoxy Resin Viscoplastic Steel Adhesive
    新型环氧建筑粘钢胶固化剂的开发和应用研究
22. Two pack, polyamide cured epoxy resin medium pigmented with zinc chromate.
    双组份、具有铬酸锌颜料和聚酰胺固化的环氧树脂介质。
23. Properties of epoxy acrylate synthesized from epoxy resin by modification and esterification;
    合成了既有环氧基团又含不饱和双键的环氧丙烯酸单酯树脂。
24. Adhesion of an epoxy resin to glass has been investigated by fracture mechanics test.
    以断裂力学方法研究了环氧树脂与玻璃的粘合及添加偶联剂的影响。
25. Air-curing anti-sticking coating is prepared with epoxy resin as binder and polytetrafluoroethylene as filler.
    以环氧树脂为基料，聚四氟乙烯为填料制备了常温固化防粘涂料。
26. Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied.
    同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
27. Nonisocyanate polyurethane ( NIPU) was synthesized by aliphatic primary diamine and cyclocarbonate prepared from epoxy resin E-44.
    以环氧树脂E-44为原料合成了环碳酸酯，再与脂肪族伯胺反应合成了非异氰酸酯聚氨酯。
28. Water-borne acrylic resin was modified by grafted copolymerization of acrylic monomer and epoxy resin.
    通过丙烯酸酯类单体与环氧树脂接枝共聚反应，对水性丙烯酸树脂进行改性。
29. Influence of catalyst on the reactivity of epoxy resin/ phenolic curing agent system
    催化剂对环氧树脂/酚类固化剂体系反应性的影响

noun

1. a thermosetting resin

   Synonym:    epoxyepoxy glue